Docs / Set it up
Connect your building
The last step is getting your building's intercom to call your Knock number. What to ask your property manager, a ready-to-send email, and two ways to do it.
Everything so far was on your side. Now your building has to dial your Knock number instead of one person's phone.
Before you ask: prove it works without the building
You can test almost the whole chain without touching the building.
- From any phone, call your Knock number.
- Knock should show At the door and your phones should ring.
- Tap Open door. The phone that called hears a short beep and the call ends. That beep is the unlock tone.
If this works, Telnyx, your number, the webhook and the app are all fine. The only thing left to confirm is that your intercom accepts the tone, and a real visitor tests that.
If this test fails with "the customer you have dialed is not available"
Your Telnyx account is probably still on Trial. Trial accounts only take calls from your verified number. Upgrade to Paid first (about $5 of credit).
Two ways to point the building at Knock
Option A: The building changes the number on file (best)
Ask your property manager or intercom company to replace the phone number for your unit with your Knock number. When it's done, a visitor buzzing your unit rings Knock.
Option B: Forward calls from the number that's on file
If the building can't or won't change the number, keep it and set that phone to forward all calls to your Knock number. Your carrier's call-forwarding feature does this, usually by dialling a short code (such as *72) or from the phone's settings.
The downside is that the person whose number is on file stays in the loop, and forwarding stops working if their phone is off, out of service or changed.
Ask the right person
Often the number on file is held by a property management company, a front desk or the intercom vendor. If you don't know who, ask whoever manages your building.
Template email
Subject: Update the intercom phone number for Unit 501
Hi,
Could you please update the phone number the intercom calls for my unit (501) to +1 XXX XXX XXXX?
It's an internet phone number from a service that lets my roommates and me all answer the door. When a visitor buzzes, the call should work exactly as it does today: the intercom dials the number, and pressing the usual digit to unlock the door should still open it.
Please let me know once it's changed, and if there's anything I need to do. Thank you!
Replace 501 and the number. If the person asks, a straightforward answer is: "It's a phone number that rings several phones in my household instead of one."
After they change it
- Ask a friend to buzz your unit from the street.
- Knock should show At the door and your phones should ring.
- Tap Open door. The door should unlock.
- If it doesn't unlock, see "The door doesn't open" below.
Warn the person who used to get the calls
If you used to receive calls on one specific phone, tell that person it is no longer going to ring, so a visitor isn't ignored while everyone assumes someone else has it.
If the door doesn't unlock
If Knock says Opened but the door stays shut:
- Wrong digit. Check your unlock digit under Settings. Your building's digit might be
#,*or another number. Ask whoever answered calls before, or the building. - The tone type. In Telnyx, your Call Control application has a DTMF Type under Advanced settings. It defaults to RFC 2833. Some intercoms need a different type, and Inband is the usual alternative. Change it, save, and try again.
- A silent line. Some intercoms hang up if they hear nothing. Knock stays silent by default. Turn on the optional greeting in Settings and test again.
- The call never reaches Knock. If Knock shows nothing at all when the visitor buzzes, the building is probably still dialling the old number.
More fixes are on Troubleshooting.